New Release: Internal Wastegate Actuator for Mitsubishi Evo 6-8


Overview:
Mitsubishi Evo Internal Wastegate Actuator (IWG) provides better turbo response and greater sensitivity when managing boost pressures. Designed as a direct bolt-on replacement for the factory part, the Mitsubishi Evo IWG is easy to install and requires no special tools or fabrication. It can’t get any easier!

Features:
• Silicone diaphragm with Nomex reinforcement to withstand high temperatures.
• High grade, billet aluminium construction
• Stainless steel rods and connecting clevis for corrosion resistance.
• Locking Collar design cap allows for quick spring changes.

Applications:
• Mitsubishi Lancer Evo 6, 7 and 8.

Part Numbers:
TS-0601-1102 10 PSI / 0.7 Bar
TS-0601-1142 14 PSI / 1.0 Bar
TS-0601-1182 18 PSI / 1.2 Bar
TS-0601-1222 22 PSI / 1.5 Bar

Go to the Mitsubishi Lancer Evo 6-8 Product Page

Share this Post!Share on FacebookTweet about this on TwitterShare on Google+Pin on PinterestShare on TumblrShare on LinkedInShare on StumbleUpon

2 thoughts on “New Release: Internal Wastegate Actuator for Mitsubishi Evo 6-8

    • Hi,

      It will be difficult to fit one of our actuators to a stock RB25 turbo as the OEM actuator rod has quite a few bends in it which will be hard to replicate, and we don’t do a direct bolt on model so you would have to make up a custom rod using one of our universal actuators. It can be done, but be aware that it’s not a straight bolt on application.