e-Boost Street 40psi
$358.74USD (Excl. Sales Tax)
Racing technology for the street eBoost Street is an electronic boost controller aimed at the street performance market. Based on the sames processor and featuring many of the same boost control …
Racing technology for the street eBoost Street is an electronic boost controller aimed at the street performance market. Based on the sames processor and featuring many of the same boost control features found on its big brother, The Award Winning eBoost2, the eBoost Street continuing the eBoost tradition of providing class-leading boost control, value for money and no nonsense features. New features include 40psi max boost operating pressure and an auxiliary output, all within the tidy 1/4 DIN case.Read More
It is the responsibility of Turbosmart to warn its customers and employees that some products sold on this website contain chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.
This product does not have a CARB EO #; it is not legal for sale or use in CA on pollution controlled motor vehicles. This is intended as a "Race Only" product to be used solely for competition. It's use is limited to closed-course and open-course racing that is formally sanctioned by a recognized racing organization; any other use including recreational off-road use, may be a violation of local, state and federal laws. It is the buyer's responsibility to verify legal use of this product for the intended application and use.
eBoost Street Spare Solenoid Kit
eBoost Street Re-Loom Kit
eBoost Street Replacement Head Unit
eBoost Street Mounting Bracket
eBoost Street 4 Port Solenoid
eBoost Street Micro-switch
What’s the first rule of boost control?
Ensure you have an over-boost cut-out. This is safety feature built in to basically all factory, aftermarket & programmable ECU’s. The eBoost Range has an Over-Boost Shutdown feature built in aswell – You can never be too careful. Make sure it is set at a sensible & reasonable limit. Increasing the boost will put more load on your engine and there are other tune related factory you must always consider. If in any doubt, speak with a professional tuner / calibrator.
Can I use this on any turbocharged engine?
If your engine is turbocharged and uses a boost-based actuator for control, then yes. This Boost Controller will work on boost-based internal wastegate actuators aswell as external wastegates.
How much boost can I add?
This will come down to the rest of your setup & tune. If in any doubt we recommend you contact a professional tuner or workshop for advice here.
What is Gate Feature?
Gate Feature is a unique Turbosmart feature that ensures our boost controllers can give you the best possible response. By manipulating the pressure signal into your actuator, Turbosmart’s Boost Controllers can provide the most aggressive boost curve.
How Many Boost Levels Can I have?
The Turbosmart eBoost Street has 2 levels & the Eboost2 has 6. You can trigger these in several ways, including boost by gear.
What sizes are Available?
eBoost Street: ¼ Din
eBoost2: 66mm / 2 5/8”
How much Boost Can it Control?
eBoost Street: Up to 40psi.
eBoost2: Up to 60psi
eBoostHP: Up to 120psi.
Boost Levels: up to 2 levels of boost.
Aux Output: fully programmable; controls water spray, methanol or nitrous injection.
RPM Compensation: eliminates boost drop-off at high RPM.
Gate Pressure: eliminates wastegate creep.
Overboost Shutdown: provides added protection for your engine .
Display: programmable, can be configured to KPA, Bar or PSI.
Auto Dimming: with back lit buttons for hassle free navigation.