eBoostHP 120psi 60mm Boost Controller (Sleeper) – 4 Port
$727.99USD (Excl. Sales Tax)
Winning five Global Media Awards and being named Runner Up for Best New Street/Performance Product at SEMA 2015, the eBoostHP takes all the eBoost2 features you know and love, and adds …
Winning five Global Media Awards and being named Runner Up for Best New Street/Performance Product at SEMA 2015, the eBoostHP takes all the eBoost2 features you know and love, and adds improved internals to effectively manage up to 120PSI of boost. The eBoost HP is perfect for drag racers and other applications running serious boost.
The eBoost HP allows the user to control, monitor, map and compensate boost. It can also control water spray, methanol or nitrous injection, manage shift/warning lights and read/monitor RPM. Like the eBoost2, the HP can effectively controlling up to six stages of boost by gear, boost by rpm, boost by time, and more, all the way up to 120 psi.
All of these features are packed into a self-contained gauge pod, with an overboost shutdown to keep your motor safe from harm.
The eBoostHP features a new, very robust high-range MAP sensor design incorporating push lock fittings and high pressure hoses to ensure durability and relentless performance under a wide range of extreme boost pressures.
Sophisticated and technologically advanced, yet easy to use, the eBoostHP’s new high-range MAP sensor, and cutting-edge boost control algorithms, allow the user to control a wider range of boost pressure.Read More
It is the responsibility of Turbosmart to warn its customers and employees that some products sold on this website contain chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.
This product does not have a CARB EO #; it is not legal for sale or use in CA on pollution controlled motor vehicles. This is intended as a "Race Only" product to be used solely for competition. It's use is limited to closed-course and open-course racing that is formally sanctioned by a recognized racing organization; any other use including recreational off-road use, may be a violation of local, state and federal laws. It is the buyer's responsibility to verify legal use of this product for the intended application and use.
eBoost2 4 Port Solenoid
eBoost2 Re-Loom Kit
What’s the first rule of boost control?
Ensure you have an over-boost cut-out. This is safety feature built in to basically all factory, aftermarket & programmable ECU’s. The eBoost Range has an Over-Boost Shutdown feature built in aswell – You can never be too careful. Make sure it is set at a sensible & reasonable limit. Increasing the boost will put more load on your engine and there are other tune related factory you must always consider. If in any doubt, speak with a professional tuner / calibrator.
Can I use this on any turbocharged engine?
If your engine is turbocharged and uses a boost-based actuator for control, then yes. This Boost Controller will work on boost-based internal wastegate actuators aswell as external wastegates.
How much boost can I add?
This will come down to the rest of your setup & tune. If in any doubt we recommend you contact a professional tuner or workshop for advice here.
What is Gate Feature?
Gate Feature is a unique Turbosmart feature that ensures our boost controllers can give you the best possible response. By manipulating the pressure signal into your actuator, Turbosmart’s Boost Controllers can provide the most aggressive boost curve.
How Many Boost Levels Can I have?
The Turbosmart eBoost Street has 2 levels & the Eboost2 has 6. You can trigger these in several ways, including boost by gear.
What sizes are Available?
eBoost Street: ¼ Din
eBoost2: 66mm / 2 5/8”
How much Boost Can it Control?
eBoost Street: Up to 40psi.
eBoost2: Up to 60psi
eBoostHP: Up to 120psi.
What does 4 Port Mean?
This refers to the solenoid that is included with the kit. Traditionally a 3 Port solenoid is what most setups will use and is a relatively simple systems and connects to just one side of the wastegate or actuator diaphragm. a 4 Port solenoid gives you more control, a wider range of boost control options by enabling you to manipulate the signal to both top and bottom cap of your wastegate, or twin port actuator.
Boost Levels: up to 6 levels of boost.
Boost on Demand: provides instant overtaking power at your fingertips
Gear-based Mapping: set a different boost for each gear!
Adjustable Boost Levels: program boost against TIME or RPM.
Aux Output: fully programmable; controls water spray, methanol or nitrous injection.
RPM Compensation: eliminates boost drop-off at high RPM.
Peak Hold/Max Boost Recall: monitors boost and RPM.
Gate Pressure: eliminates wastegate creep.
Overboost Shutdown: provides added protection for your engine.
Display: programmable, can be configured to KPA, Bar or PSI.
Auto Dimming: with backlit buttons for hassle free navigation.