Kompact EM BOV VR15 Dual Port
$288.83USD (Excl. Sales Tax)
The Multiple Award-winning Kompact EM Series of Upgraded Diverter Valves are the world’s first truly plug and play Upgrade solution for your factory diverter valve. Unplug and unbolt your OEM Valve, and install a Kompact EM Valve in its place. No adaptors, hoses or extra assembly are required.
The Kompact EM Valve Series from Turbosmart takes the motorsport proven billet valve technology and adds an onboard proprietary solenoid system and internal pressure control channels for a simple plug & play valve with full OE integration and control. There are no reference hoses, no separate solenoids and no fiddly bits – Just bolt-on & plugin!
You can count on unmatched performance & reliability as a direct replacement for your factory diverter valve. The Kompact EM Valves overcome the common faults associated with plastic factory valves through our Boost-Balance Valve Design (The more boost you have, the better it seals), Positive Seal O-Ring on the Piston’s face and Billet Construction. No matter your application, the Kompact EM Series will hold more boost and be more responsive in any environment.
Dual Port / Vent to Atmospheret: TS-0223-1084
Plumback / Recirculating: TS-0223-1284
Boost-Balance Valve Technology
Patented integrated pressure control
True plug and play upgrade
Integrated proprietary high-temperature solenoid valve
Billet construction with high temperature o-rings
Fitment available in Plumback or Dual Port options
USA Patent: 10,781,745
AUS Patent: 2018253619
Suitable for certain Abarth 124 and 500 Abarths made in Mexico (North American delivered 500 baths), Alfa Romeo, Fiat & Lancia vehicles. Please look up the vehicle application list for more detail.
If you have an Abarth 595 or 695 (assembled in Italy or Poland), then please use TS-0223-1089 / TS-0223-1289)
It is the responsibility of Turbosmart to warn its customers and employees that some products sold on this website contain chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.
This product does not have a CARB EO #; it is not legal for sale or use in CA on pollution controlled motor vehicles. This is intended as a "Race Only" product to be used solely for competition. It's use is limited to closed-course and open-course racing that is formally sanctioned by a recognized racing organization; any other use including recreational off-road use, may be a violation of local, state and federal laws. It is the buyer's responsibility to verify legal use of this product for the intended application and use.
VR15 Replacement Solenoid
VR15 Replacement O-Ring Kit
Why would I upgrade my factory Diverter or Bypass Valve?
Fundamentally, factory Diverter Valves are built to a price point rather
than with performance in mind. At Turbosmart, we want you to have the best
performance available to you and our range of upgraded valves are designed to
overcome the limitations of factory equipment with improved sealing and valve
dynamics. A Turbosmart Upgraded Valve will ensure you have all your available
boost with maximum response.
How does the Turbosmart Valve provide performance benefits?
The Turbsmart Range of Direct Replacement Valves use our Unique Boost-Balance
Valve Technology, as well we a Positive Seal O-Ring on the Piston Face and are
made from Motorsport Proven & Hand Assembled, Billet Aluminum. These
features ensure you the fastest responding valve and incredible boost holding characteristics
in a valve this is virtually indestructible.
What is the Turbosmart Boost-Balance System?
Our Valves are designed to ‘actuate, or open’ via a pressure
differential, rather than boost alone. This means we can run the lightest
possible spring for super-fast response, but it also means both sides of the
piston are subjected to the same boost pressure when accelerating and under
load. This means no matter how much boost you run; Turbosmart Valves will not
open unless you want them to! At any point in time, you have all your boost pushing
it closed PLUS the spring itself!
What is the Turbosmart Positive Seal O-Ring, and why does it matter?
As above due to our Boost-Balance technology, the piston of Turbosmart valves
are always being pushed into the valve seat when you are accelerating and under
load. On Turbosmart valves, unlike others we use a Viton O-Ring on the face of
the valve which ensures the best possible seal against the body. This seal means
maximum boost pressure at all times & improves boost response.
Can I Vacuum or Smoke test my Kompact Valve?
You can vacuum test these valves, however you will need a hi-flowing mechanical
vacuum pump – you cannot use a hand actuated vacuum pump as these do not
replicate the flow your valve would see when fitted to an engine meaning you
will likely achieve nothing except for a ‘False-Positive’ to a leak test. These
do not use an O-Ring on the side of the piston and are not based on a diaphragm
like the OE equipment and instead the design focus is on sealing, speed and
overall flow. This design and lack of diaphragm or O-Ring also means you cannot
use a smoke test to test of validate a Turbosmart Valve.
How Much Horsepower will these valve handle?
More than you have! Due to the unique Turbosmart Boost-Balance System,
you literally can’t have too much power or boost for the Kompact Range of Vales
& at no point will they leak based on ‘Too-Much’ anything. The more boost
you run, the better they will seal. With that said, extremely modified engines may
be able to find the limit of how much these valves can bypass when open &
this is the only limit. If you’re at this level you may want to consider a
remote mounted valve with more flow potential to avoid audible compressor
surge, however at no point will the valve open or vent due to too much boost or